SUBMERSIBLE PUMPS FOR DRAINAGE AND WASTE WATER
Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing. Rotor mounted on overdimensioned, greased-for-life ball bearings. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version. For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force.
Supplied with standard power cables for the single-phase version: 5 metres HO5RN-F cable for: NOVA 180 M-A NOVA 300 M-A NOVA 600 M-A FEKA 600 M-A 10 metres HO5RN-F cable for: NOVA 180 M-NA NOVA 200 M-NA 10 metres HO7RN-F cable for: NOVA 600 M-NA FEKA 600 M-NA Standard cables supplied for the three-phase version: 5 metres of HO7RN-F cable. For the single phase the standard is a SCHUKO plug EEC VII. For special version available with special stainless steel motor shaft.
Operating range: from 1 to 16 m3/h with head up to 10.2 metres Liquid temperature range: from 0°C to +35° C for domestic use
Pumped liquid characteristics: NOVA fibre-less murky water FEKA sewage water from septic tanks Granulometric passage through the suction grid: NOVA 180 NOVA 200 5 mm NOVA 300 NOVA 600 10 mm FEKA 600 25 mm Min. suction depth: NOVA 180 A 77 mm NOVA 180 NA NOVA 200 8 mm NOVA 300 85 mm NOVA 600 A FEKA 600 A 175 mm NOVA 600 NA FEKA 600 NA 38 mm Maximum immersion depth: 7 metres Maximum dry running time: 1 minute Protection level: IP 68 Insulation class: F
Please contact us for more information